At present, DC brushless blowers mostly use brushless DC motors, which greatly simplify the structure of brushless DC motors by eliminating the collector ring and brushes for excitation. It not only improves the technical performance of the motor, but also greatly improves the mechanical reliability and life of the motor. Not only that, it also has excellent control performance compared with other motors. This is because the torque constant, torque inertia ratio, and power density of the motor have been greatly improved due to the high performance of permanent magnet materials.
Through reasonable design, the inertia and electromechanical time constant can be greatly reduced and greatly improved as the main index of servo control performance. The design of modern permanent magnet circuit has been improved, and the coercivity of permanent magnet material is high. As a result, the armature response and demagnetization resistance of permanent magnet motors have been greatly improved, and the control parameters of the motors have been greatly reduced under the influence of external disturbances.
Since permanent magnet is used instead of electric excitation, the design of excitation winding and magnetic field is reduced, thus reducing the parameters such as excitation flux, excitation winding inductance and excitation current, thus enabling the control variables or parameters to meet the design requirements. Direct reduction. All these factors can be said that DC brushless blowers have good controllability.
DC brushless motors are widely used in daily life, so do you know the advantages of DC brushless motors, the following I introduce you to the characteristics of DC brushless motors.
1, no carbon brushes, low interference DC brushless motor in addition to carbon brushes, the most direct change is that there is no brush geared motor operation generated by electric sparks, which greatly reduces the interference of electric sparks to remote radio equipment.
2, low noise, smooth operation DC brushless motor without brushes, friction is greatly reduced when running, smooth operation, noise will be much lower, this advantage for brushless geared motor running stability is a huge support.
3, long life, low maintenance costs DC brushless motor less carbon brushes, brushless geared motor wear is mainly on the bearings, from a mechanical point of view, brushless geared motor is almost a maintenance-free motor, when necessary, only need to do some dusting maintenance can be. Brushless DC motor life is generally between several tens of thousands of hours, while the ordinary brush motor life is generally between 1000-2000 hours.
4Energy saving and noise reduction DC brushless motor adopts frequency control and stepless speed regulation to realize indoor constant temperature control, which saves energy up to 50% or more than traditional AC fan coils.
The blower is mainly composed of the following six parts: motor, air filter, blower body, air chamber, base (and oil tank), and drip nozzle. The blower runs eccentrically by the rotor offset in the cylinder and makes the volume change between the blades in the rotor slot to suck in, compress and spit out the air. In the operation of the blower using the pressure difference between the automatic lubrication to the drip nozzle, drip into the cylinder to reduce friction and noise, while maintaining the cylinder gas does not flow back, this blower is also known as the slide blower. The blower's types can be classified acccording to its applications, including, CPAP blower, Bipap blower, ICU ventilator blower, Purifying respirator blower, Air bed blower, Home appliance blower, etc.